12V TurboWerx Exa-Pump® MINI/Regular Electric Scavenge Pump engine oil coolling system
Product description: • 12V DC version • 350F (175C) Fluid Temperature • 2-3GPM Scavenge Pump Rate depending on oil temperature/viscosity, 50+ PSI continuous as Pressure Pump • Hardened Bronze Gear Pump Rotors • 10,000 Hour Rated Dual Hybrid Ball Bearings • 10,000 Hour Rated Over-sized Brushes • Highest Rated Temperature (class H or higher) Insulated Copper Motor Windings • Black Anodized Extruded Aluminum Bracket/Heatsink • Nickel-plated Pump Head • Stainless Steel Pump Head Fasteners • 3/8" NPT Female Threaded Pump Head Ports • Set of two 3/8” NPT -> AN Nickel-plated Adapters Included - Options are -6AN, -8AN, or -10AN Sizes - if size preference not specified at order time, -8AN supplied. • High-Temperature Power Wiring • Weatherproof Connectors • Rubber-isolated Mounting Bracket • Low-vibration, Quiet • 6 lbs Total Weight, 3” Diameter Motor,- For the most weight/space-critical applications see our newly announced Exa-Pump® “Mini!” • Reversible Pump Flow via Power Polarity Reversal • Not designed for use as a fuel pump • Warrant void if 350F (175C) rated temperature is exceeded. • Rated voltage may be exceeded by up to 25%. Warranty void if applied voltage exceeds 25% of rated voltage as labeled. • For 100% compatibility with 16-18V set-ups on race vehicles, choose the 24V Exa-Pump® • Operating Current: 12 VDC <5A nominal, 20A maximum. Pump MUST be protected by circuit breaker or fuse - 12V pump 20A. A fuse or circuit breaker will protect the pump from permanent damage in case of rotor-lock from ingesting foreign debris. Note “nominal” means the typical current in a typical installation as a scavenge pump with a free-flowing output. When the temperature of the oil is very low, the oil’s viscosity is much greater, and the pump will consume more current until the oil warms up. The fuse or circuit breaker current value takes into account the additional current needed for pumping oil at low temperatures. As a pressure-pump, the pumps are rated min. 50PSI. Exceeding any of these ratings will void warranty. (50-75PSI operation range is possible, but not guaranteed or warranted). • Two-year Warranty - warranty void if pump is modified, or current ratings exceeded. Warranty only for genuine TurboWerx products.
Pos & Penghantaran
The price including postage west malaysia.